1018 steel plate spec,Introduction to 1018 Steel Plate Spec 1018 steel plate is a commonly used type of steel in various industries. The "1018
Introduction to 1018 Steel Plate Spec
1018 steel plate is a commonly used type of steel in various industries. The "1018" refers to the American Iron and Steel Institute (AISI) numbering system. In this system, the first two digits, "10", indicate that it is a plain carbon steel. The last two digits, "18", represent the approximate amount of carbon in the steel, which is 0.18% in this case.
The spec of 1018 steel plate includes several important aspects. It has a relatively low carbon content, which gives it good formability and weldability. This makes it suitable for applications where shaping and joining are required, such as in the manufacturing of automotive parts, machinery components, and construction elements.
From a mechanical properties perspective, 1018 steel plate typically has a tensile strength in the range of 440 - 590 MPa. It also has a reasonable yield strength, which allows it to withstand certain amounts of stress without permanent deformation. Its hardness is relatively moderate, which can be adjusted through heat treatment processes if necessary.
Common Uses of 1018 Steel Plate
In the automotive industry, 1018 steel plate is often used for parts like brackets, mounts, and some body components. For example, the small brackets that hold various engine parts in place can be made from 1018 steel plate. Because it is easy to form into the required shapes and can be welded easily to other parts.
In construction, it can be used for structural elements that do not require extremely high strength. For instance, some light - duty support beams or frames in small - scale building projects might use 1018 steel plate. It provides a cost - effective solution while still meeting the necessary structural requirements.
Another area of use is in general machinery manufacturing. Gears, shafts, and other components that operate under normal working conditions can be made from 1018 steel plate. Its good machinability allows for precise manufacturing processes.
Questions and Answers about 1018 Steel Plate Spec
Question: What is the main advantage of 1018 steel plate in terms of its spec?Answer: One of the main advantages of 1018 steel plate spec is its low carbon content, which gives it good formability and weldability.
Question: How does the carbon content in 1018 steel plate spec affect its applications?Answer: The 0.18% carbon content in 1018 steel plate makes it suitable for applications where shaping and joining are important, such as in automotive, construction, and machinery manufacturing, because it provides good formability and weldability due to this carbon level.
Below is,1018 steel plate specpartial price list| Category | Market Price | Use Cases |
| 316 stainless steel price per pound | 1052$/Ton | Stair handrails, walls |
| 4x8x1/4 steel plate | 1060$/Ton | Train cars, ships |
| 16 gauge ss sheet | 1066$/Ton | Handrails, doors and windows |
| 1 16 stainless steel sheet | 1073$/Ton | Automobile shells, body parts |
